Columbia, SC Well Pump Repair

We may not be pioneers from ancient times that need to use well-built aqueducts to access freshwater reservoirs such as rivers, lakes, and oases. But we do thankfully have the modern conveniences of residential and commercial plumbing, including an electromechanical system for drawing out clean, safe, and sanitary drinking water through a well pump. If you’ve noticed fluctuations in your water pressure from your plumbing fixtures, such as your sinks, toilets, showerheads, and more, it may be due to a faulty well pump. At this rate, it may be about time for a well pump repair from a certified, licensed, and fully insured plumber.

Although Columbia is blessed with ample freshwater reservoirs, a good water pump repair is a worthwhile endeavor as the average lifespan of a good pump is up to 15 years. You’ll also get the added benefit of having backup support for your home’s water supply. Property owners in have the privilege of local amenities and numerous accredited service providers for professional well pump repair and maintenance and don’t need to bother searching classified advertisements online for well pump repair near me.

Mr. Rooter Plumbing of Columbia SC boasts an outstanding track record, having served Columbia and nearby areas of Ballentine, Irmo, or Lexington, for nearly two decades and counting. If your existing well pump is not working properly, our expert and experienced Columbia plumber will provide the provide the necessary repair service so you can crank out freshwater once more.

Our Popular Well Pump Repair Services

Your home may not have access to a spring freshwater basin, but it does have a well pump to extract and redirect a stream of fresh water from deep underneath the ground from a hollow ditch of sorts. Typically, a mechanical device is inserted within this hole to capture the flow of water, which is diverted to an attached discharge pipe. A fully functioning unit will allow water to trickle into the basin until the threshold level is reached, upon which the unit’s sensors are activated. Upon this, the pump itself will begin to suction an excess amount of supply through the impeller or the centrifugal pump and transport the water upwards inside your home. Sometimes, your system may be busted due to rust and sediment buildup, coolant leaking, or overheating, and you will require a well pump repair service to get it back on track. If you’ve noticed any of these problems, it’s best to hire a professional technician to take a look. Here are other telltale signs that indicate you need repair:

  • Change in water pressure levels in your plumbing fixtures
  • Total loss of water supply
  • Odd noises from the pump or pressure tank
  • Skyrocketing utility bills

It’s best not to outright ignore a well pump repair as your supply can get completely cut off once you are surprised to find nothing coming out of the tap or flushes down your toilet.

Our Established Well Pump Repair Process

Oftentimes, a well pump unit becomes glitchy, and you require the assistance of a skilled plumber for a professional well pump repair. Homeowners can opt to no longer be in a dry and arid desert by allowing themselves the opportunity for a freshwater oasis courtesy of Mr. Rooter Plumbing.

Types Of Well Pumps We Repair

Generally, these units will either utilize a motor and a suction pipe to pull water above the ground using a jet or use a pressurized stream of water below the ground to push water to the surface via an above-ground storage tank.

Here are the common types of well pumps found in Columbia homes:

Jet: This is a motorized jet pump that is assembled with a pump and a motor alongside a pressure tank. It requires water to operate the pump by default, which uses suction to draw water through an impeller or centrifugal pump. The impeller moves water through a narrow orifice which propels and speeds up the water. As water exits the jet into your plumbing system, a vacuum continues to suck extra water from the well and dispatches it into your home at high pressure. As a safety mechanism, one-way check valves are installed to prevent water from flowing backward.

Submersible: This cylinder-shaped unit consists of a water pump and sealed pump motor alongside an internal check valve and does not necessarily require a pressure tank. This pump must be completely submerged in liquid to work and also operates on a sequence of impellers that push water up a pipe. Once the pressure switch is turned on, the impellers are triggered and, as a result, push water upwards into the storage tank, which is above ground. The water flow itself is regulated by an adapter that redirects water from the pump into the home’s plumbing system.

Types Of Components

The standard well pump is composed of an electric motor, an impeller which is a rotating set of blades that moves fluid through the pump, and lastly, the housing, including internal pump check valves and pump control switches.

Pressure Switch: A pressure switch automatically switches water on and off depending on the preset pressure settings. A well pressure switch turns the system on as the pressure decreases to a dangerously low cutoff point and switches it off after the pressure increases beyond the minimum threshold. As a general rule of thumb, once pressure levels reach between 40 and 60 psi, the switch will automatically turn off the pump. If the pressure level falls well below this range, the switch will turn the pump back on to supply water once more.

Foot Valve: The foot valve is responsible for stopping water from flowing back out of the jet pump into the source of water when the unit, specifically a deep-well pump, itself is turned off.

Check Valve: A check valve similar to a foot valve prevents water from flowing back into the well if the pump happens to be turned off and protects the system from getting waterlogged and damaged. Depending on the depth of the well itself, a well pump may need just one of the multiple check valves.

Pressure Tank: The well pressure tank manages the water pressure within the household but above all protects and preserves the unit as a whole. It does this by regulating the water pressure levels to help keep your plumbing fixtures operating smoothly. Water is pumped into a tank only to be compressed and distributed evenly throughout your house. For example, each time you turn on the tap, a toilet flushes or someone turns on the faucet to take a shower, water instantly trickles from your well.

Why We Are The Best Choice For Well Pump Repair in Columbia, SC

Although you may already have a generous supply of fresh water for your property, it doesn't hurt to look into backup options, especially if you reside outside city limits in which a well may be your only source of water. The last thing you want to encounter is no supply whatsoever from your taps, all thanks to a busted system. For any Columbia resident, your best bet is to ask an experienced and licensed plumber for a routine inspection and diagnosis and following up with a well pump repair service. This way, you’ll never have to fret about potential plumbing issues.

FAQs About Our Well Pump Repair Near Me Services

What Exactly Is A Well Pump?

The sole purpose of it is to supply water to a building. As a pressurized tank system, a well pump transports water from an underground reservoir into your home’s plumbing system and its freshwater supply lines. It is a water supply system that draws fresh water from a well and pulls or pushes it into a well or storage tank where it remains stored until you require its use. And so, a well pump can provide a generous amount of fresh water to your home by utilizing a pressurized tank system that sends water up from the freshwater reservoir or storage tank, relaying it to your home’s plumbing. As water is pumped into the tank itself, the accumulated air pressure increases until it reaches the designated and predetermined level. The unit itself is usually found above the ground and generates a high level of pressure to pull water from the well directly into the home via an inlet pipe. If anything, unless your house is located near a storage tank perched atop a higher elevation like a hill, the only other way you can get a freshwater supply apart from the municipal water system is through a well pump which uses a combination of a pump, pressure tank and the compressed air contained within to forge a pressurized stream of water into your home’s plumbing system. More and more homeowners are opting for a well pump as it allows them to access a private and independent freshwater reservoir.

How Do I Know What Type Of Well Pump Is Best For My Home?

Depending on the depth of the source of water or well, whether it’s shallow or deep, will determine if you need a jet pump or submersible pump. For example, if the source of water is a good 25 feet deep, you will have to use a submersible pump system.

What Would Cause A Well Pump To Stop Working?

If the circuit breaker has tripped, the well pump can falter and stop working. Any short circuit in the wiring or motor can cause the breaker or fuse to trip and blow out. There could be other reasons, too, such as broken components from the check valve, a partially closed gate valve, or even a leaking pressure tank.

Why Does A Well Pump Run When No Water Is Being Used?

This system is intentionally designed to shut off after it reaches a minimum threshold pressure. Plus, a major leak anywhere in the pipe of the system can lower the water pressure too. If the pressure happens to be too low, the pump won’t shut off and will continue running in the background.

How Many Years Should A Well Pump Last?

Generally speaking, a well pump can last between 8 and 15 years, but it also depends on the way it’s used and the type of pump that’s chosen, either jet or submersible. Plus, other factors, such as the size and quality of the motor in the pump, can also affect how long it lasts. For example, a pump with a larger motor will last longer.

Mr. Rooter Plumbing Will Open The Floodgates To Your Home’s Fresh Water Supply With a Well Pump Repair!

Don’t procrastinate on unleashing a stream of fresh water into your home with a well pump repair service. Save the hassle of asking your friends and family for referrals to a well pump repair near me by relying on one of our trustworthy team members who always advocate for their clientele by genuinely listening to their pain points. Whether you’re in Columbia, SC or the surrounding areas, we will show up uniformed and prompt for your well pump repair service appointment and can even handle 24/7 emergencies.

Go ahead and reach out to one of our courteous customer service representatives who can schedule your no-obligation appointment and inform you further about our residential and commercial plumbing services from drain cleaning and clogged drains to water heater repair as we await to serve you.

help icon
Got a plumbing problem? Call Mr. Rooter!

Let Us Call You

*Required

We're sorry. We don't currently provide service to